Paramus, NJ · Restaurant Equipment Repair
Hobart Repair in Paramus
Hobart Commercial Equipment Specialist
Hobart is the definitive name in commercial warewashing and food prep — door-type and conveyor dishmachines, undercounter dishwashers, planetary mixers, meat slicers and food processors. A down Hobart dishmachine means a pile of dirty dishes and a health-code clock; Hobart mixers and slicers are the backbone of bakeries and delis.
- Rating
- 4.9★ (412)
- Response
- Same-day / 24-7
- Warranty
- 90-Day Parts & Labor Warranty
- Focus
- Commercial Only
Serving Paramus
Hobart Commercial Equipment Specialist
The short answer
Hobart Repair in Paramus typically runs $300–$1,100 — the $125 diagnostic is credited toward the repair. Most jobs finish same-day in one visit with genuine OEM parts, backed by a 90-Day Parts & Labor Warranty. For down equipment we run 24/7 emergency service. Call (914) 350-6776.
Warewashing carries a health-code clock most equipment doesn't — a Bergen County kitchen with a dishmachine that won't hit 180°F is out of compliance the moment an inspector checks. Hard water in the area scales booster heaters and rinse jets, which is the top cause of low-temperature calls. We prioritize dishmachine repairs, verify sanitizing temperature on a thermometer, and keep mixers and slicers — the other Hobart workhorses — rebuilt and safe.
Why Choose Us
- Sanitizing final-rinse temperature verified on site (health-code ready)
- Dish machine, mixer, slicer and food-processor coverage
- OEM Hobart heaters, contactors, pumps, gearbox and drive parts
- Slicer safety interlocks and guards always verified
- Urgent, same-day warewashing response
- 90-day parts & labor warranty
Maintenance Tips
- Delime the dishmachine and booster on schedule — scale kills final-rinse temperature
- Clean wash and rinse arms/jets daily so water actually reaches the load
- Check sanitizer/rinse-additive levels and dispensing every shift
- Keep mixer bowl-lift ways clean and lubricated per Hobart's schedule
- Have slicer blades sharpened and guards checked routinely
- Verify final-rinse temperature with a thermometer periodically for your records
Spec sheet
| Service | Hobart Repair |
|---|---|
| Turnaround | Same-day; 24/7 emergency |
| Diagnostic | $125 — credited to the repair |
| Warranty | 90-Day Parts & Labor Warranty |
| Most common fault | Diagnosed on site |
| Serving | Paramus, Hackensack, Ridgewood, Fair Lawn, Rutherford & Bergen County |
What repairs cost
Straight pricing, no surprises.
These are typical all-in market ranges for parts and labor on commercial kitchen equipment across Paramus and Bergen County. Your exact price is quoted on site after diagnosis — the $125 service call is credited toward the repair when you proceed.
| Repair | Typical range |
|---|---|
| Diagnostic / service call | $95–$165 |
| Commercial dishwasher repair | $300–$1,100 |
Ranges are estimates for reference, not a quote. Genuine OEM parts · 90-Day Parts & Labor Warranty.
How a call goes
One tech. Fast. Back in service.
- 01
Call dispatch
Reach a real person at (914) 350-6776 — down equipment gets priority, day or night.
- 02
Diagnose under load
We test the actual failing part — sealed system, gas control, booster, water system — not guess-and-swap.
- 03
Fix with genuine parts
Common commercial parts ride on the truck, so most repairs finish in a single visit.
- 04
Verified & warrantied
We confirm safe temperature, sanitizing or ignition, back it with a 90-Day Parts & Labor Warranty, and leave the kitchen clean.
Answers
Frequently asked questions
Our Hobart dishwasher runs but the dishes aren't getting sanitized — is that a code violation?
Yes — if a high-temp machine isn't hitting its 180°F final rinse (or a low-temp machine isn't dispensing sanitizer), dishes aren't legally sanitized and it's an inspection failure. The usual cause is a failed booster heater or element, a bad thermostat/contactor, or a chemical-dispensing fault. We test and repair the heating or dispensing system and verify sanitizing temperature or chemical concentration on site.
The final rinse on our Hobart isn't hot enough. What fixes that?
Low final-rinse temperature is almost always the booster heater — a failed element, contactor, thermostat, or high-limit — or a supply-water issue feeding it. We diagnose the booster circuit, replace the failed component with OEM parts, and confirm the machine reaches sanitizing temperature.
Our Hobart mixer is slipping / making noise / won't lift the bowl. Repairable?
Almost always. Hobart planetary mixers are built to be rebuilt — worn drive belts, gearbox lubrication and gears, bowl-lift mechanisms and controls are all serviceable. We diagnose the drive, replace the worn components with OEM parts, and get the mixer back to full torque so your bakery or pizza line keeps moving.
Can you sharpen and repair our Hobart deli slicer safely?
Yes. We service the blade drive, built-in sharpener, and controls, and we always verify the ring guard and safety interlocks because slicer injuries are serious. A slicer that stalls, won't sharpen, or runs rough is a straightforward OEM repair.
How fast can you get a down dishmachine back up?
We treat warewashing as urgent — a kitchen can't legally run long without a working sanitizing dishmachine. We carry common Hobart elements, contactors, pumps and controls and aim to restore sanitizing operation same-day across Paramus and Bergen County.
Verified reviews
Rated 4.9★ by Paramus restaurant operators
412 verified reviews
“Outstanding Hobart repair service! The technician was very knowledgeable about Hobart appliances and fixed our door-type dishwashers quickly. Highly recommended!”
“The final rinse on our Hobart wasn't hitting 180 and we were days from an inspection. They found a failed booster element, delimed the machine, replaced the part, and verified the sanitizing temperature on a thermometer before leaving. No drama, no upsell, just fixed and compliant.”
“Our 20-quart Hobart mixer was slipping and struggling with bagel dough. I thought I'd have to buy a new one. They rebuilt the drive and gearbox with OEM parts for a fraction of replacement cost and it runs like new. Honest people who fix instead of sell.”
“Our True reach-in on the sauté line died at 4pm on a Friday with the box full of prep. They were here within the hour, found a fouled condenser and a bad fan motor, and had us cold again before the dinner rush. We didn't lose a single pan of inventory. This is exactly the response a restaurant needs.”
Across Paramus, Hackensack, Ridgewood, Fair Lawn, Rutherford and the wider Bergen County restaurant scene, Paramus Commercial Appliance Repair is the team operators call when a hobart repair needs a commercial specialist rather than a generalist. We diagnose the actual fault under load — not guess-and-swap — carry genuine OEM parts on the truck for most Paramus visits, and back every repair with a 90-Day Parts & Labor Warranty. Downtime is lost revenue, so we run 24/7 emergency service and flag the wear that leads to repeat failures before it strands you mid-service or in front of a health inspector. Call (914) 350-6776 for same-day and emergency service.
4.9★ · Paramus & Bergen County · 24/7 Emergency
Need Hobart Repair in Paramus?
Call (914) 350-6776 for same-day & 24/7 emergency service in Paramus.